Top 10 PVC Film Adherente Fabricantes in China (2026 Guide)

If you are sourcing PVC film adherente, China is where most of the world’s supply is actually made — but the market is fragmented. Of the thousands of listings on Alibaba and 1688 that tag themselves “PVC film adherente fabricantes china”, the large majority are traders, rewinders or small converters rather than the resin-to-roll factories that supermarket chains and food processors really need. This guide names the real players that matter in 2026, shows where each fits, and ends with the five evaluation criteria we recommend B2B importers apply before placing an order.

A note on scope: we have deliberately avoided inventing fake companies. Where the long tail of smaller factories is relevant, we describe the category rather than naming businesses we cannot verify.

How the Chinese film adherente industry is structured

China produced roughly 1.06 million tonnes of film adherente in 2023, with domestic demand around 0.92 million tonnes — the remainder is exported. PVC accounts for 60–70% of that volume, which still makes polyvinyl chloride the single largest cling-film resin in the country despite the EU’s PVC phase-out pressure. (For a closer look at how resin becomes finished rolls, see our manufacturing process overview.) The industry has three fairly distinct tiers:

• Tier 1 — International brands with China operations: Berry Global, Klöckner Pentaplast, Reynolds, Mitsubishi Chemical. These players serve multinational QSR and retail accounts, mostly through contract manufacturing. Import prices reflect the brand premium.
• Tier 2 — Chinese branded fabricantes: the group that matters for most B2B importers. Names like SUNWRAP, Miaojie and Nanya sit here. Proper grado alimenticio compliance, consistent thickness control, export-ready documentation, moderate prices.
• Tier 3 — Smaller OEM factories and traders: several thousand listings, heavy price competition, highly variable quality. Fine for some non-food and promotional uses; risky for anything that touches food in a regulated market.

The 2026 list

These are the Chinese PVC film adherente fabricantes B2B importers most commonly encounter. Ordering is by industry footprint rather than a numeric ranking — every fábrica on this list serves a different buyer profile.

1. SUNWRAP (Ningbo Sanrong New Materials Co., Ltd.)

• Location: Ningbo Qianwan New Area, Cixi, Zhejiang — roughly 40 km from Ningbo-Zhoushan Port.
• Specialty: Food-grade PVC film adherente for supermarket fresh-envoltorio alimentario, HORECA and food-processing lines. Korean-invested (subsidiary of Sanyoung Chemical, Korea), in continuous production since April 2004.
• Target market: Southeast Asia (Philippines, Indonesia, Vietnam), the Middle East (UAE, Saudi Arabia), Egypt, Nigeria, India; supermarket chains, HORECA groups, food processors, private-label brands.
• Notes: Named one of China’s top-ten cling-film brands. FDA-compliant, SGS-tested. Relocated from Dalian to Ningbo Cixi in 2025 with expanded lines including PE film adherente, total investment RMB 400 million.

2. Miaojie (妙洁)

• Location: Shanghai-based household-products group.
• Specialty: Consumer-facing film adherente, household foil, cleaning products. Dominant on Chinese supermarket shelves.
• Target market: Primarily Chinese domestic retail and e-commerce; limited export focus.
• Notes: The benchmark brand for Chinese household film adherente. Strongest in B2C; less oriented toward B2B export sourcing.

3. Nanya Plastic Film (南亚塑膠)

• Location: Group presence across China, with plants in Jiangsu and Guangdong.
• Specialty: Very broad plastic-film portfolio — PVC, PE, PET, multilayer barrier. Large-scale producer with strong process engineering.
• Target market: Industrial, packaging and construction film buyers; some food-film volume.
• Notes: Part of the Formosa Plastics group. Bigger than any pure cling-film specialist on this list, but film adherente is one of many product lines rather than the core focus.

4. Kelin / Meijiale category (柯林 / 美佳乐)

• Location: Various, mostly Zhejiang and Jiangsu.
• Specialty: Mid-range branded film adherente for Chinese supermarkets and HORECA, with increasing export activity.
• Target market: China domestic retail, Southeast Asia export.
• Notes: A good example of the Tier-2.5 segment — recognisable brand at home, steady mid-market positioning in export.

5. Jiangsu-based PVC film specialists (category)

• Location: Suzhou, Wuxi, Changzhou.
• Specialty: Industrial and grado alimenticio PVC film, often servicing processors rather than retail.
• Target market: Food processors, packaging converters, domestic and export.
• Notes: Several well-run factories in this cluster. Most are better at jumbo rolls than at finished retail SKUs.

6. Shandong PVC film cluster (category)

• Location: Qingdao, Weifang, Linyi.
• Specialty: Large-volume PVC film of varying grades. Strong in industrial PVC, less consistent in grado alimenticio.
• Target market: Industrial, non-envoltorio alimentarioping; export of commodity-grade PVC film.
• Notes: Price-competitive. Buyers should scrutinise food-contact documentation rigorously.

7. Guangdong converters (category)

• Location: Foshan, Dongguan, Shenzhen.
• Specialty: Consumer-pack converters and private-label finishers; many do not extrude their own film but buy jumbo rolls and slit/package them.
• Target market: Retail private label, e-commerce sellers, Southeast Asia.
• Notes: Good for finished retail SKUs with colour-box packaging. For food-contact compliance, insist on knowing who extrudes the base film.

8. Henan Sanhong (河南三虹)

• Location: Henan.
• Specialty: PVC film adherente and general plastic packaging film.
• Target market: Domestic and some export.
• Notes: Sometimes confused with Sanrong/SUNWRAP because of the similar transliteration — the two are unrelated businesses.

9. Changsu Film / similar independent PVC extruders (category)

• Location: Scattered, mostly east-coast China.
• Specialty: Medium-scale PVC film extrusion, often serving specific regional accounts or industrial use cases.
• Target market: Mixed.
• Notes: Useful as secondary proveedors once the primary fábrica is locked in. Due diligence requirements are the same as for the main proveedor.

10. The 1688 long tail (4,000+ listings)

• Location: Nationwide.
• Specialty: Every conceivable SKU, price point and quality level.
• Target market: Domestic al por mayorrs, small e-commerce sellers, promotional buyers.
• Notes: Cheap, fast and risky. For food-contact export, we recommend avoiding this tier unless the buyer has in-house QA capacity to run incoming inspection on every lot.

How to compare these proveedors at a glance

Dimension	Tier 2 branded factories	Tier 3 OEM factories / 1688
Food-contact compliance	FDA, SGS, EU DoC routinely available	Patchy, often request-only
Batch-to-batch consistency	Tight thickness tolerance	Highly variable
Export documentation	Full set (CO, MSDS, test reports)	Often missing pieces
MOQ	20GP container typical	A few hundred cartons acceptable
Price level	Baseline + 5–10%	Baseline
Private label / OEM	Yes, with artwork support (private label guide)	Yes, with less design support
Typical lead time	15–25 days	10–20 days
Risk profile	Low	Medium to high

Five criteria B2B buyers should use

After interviewing export managers and auditing documentation from dozens of Chinese cling-film factories, we consistently see the same five criteria separate good proveedors from bad ones.

1. Food-contact compliance — and paperwork to prove it

Ask for: current FDA 21 CFR 177.1950 test report, SGS (or equivalent) heavy-metal and plasticiser-migration report dated within the last 12 months, and — if you are shipping into the EU — a Declaration of Compliance with EU Regulation No 10/2011. A credible fábrica sends these inside 48 hours. A proveedor that needs two weeks to “prepare” the report probably does not run the tests routinely.

2. Fábrica or trader?

Ask the proveedor to send a dated photo of their extrusion line and a short video showing the jumbo roll coming off the winder. Cross-check the business licence (营业执照) against the plant address. Our HS code guide also shows what a genuine fábrica’s export records should look like. If the photos are generic, the address is a small office in a commercial tower, or the salesperson declines a video call with the fábrica floor in the background, you are probably talking to a trader. That is not automatically bad, but it changes your QC responsibilities.

3. Batch-to-batch consistency

Request the thickness-tolerance specification (e.g. ±0.5 micron on a nominal 10-micron film) and the fábrica’s internal QC checklist. A serious fábrica will also retain production samples per export lot for at least 6–12 months, so that if a customer complaint arises three months later, the exact batch can be pulled and re-tested.

4. Logistics and shipping capability

For export, port proximity matters. Factories near Ningbo-Zhoushan (the world’s number-one port by cargo volume) or Shanghai generally offer lower ocean freight, faster truck turn and more sailings to Southeast Asia, the Middle East and Africa than factories located inland. Ask how long truck-to-port takes and how often they load full containers — a fábrica that loads two FCL per week has very different reliability than one that loads one every two months.

5. Commercial terms and communication

Look for: FOB quotation as default (with CIF on request); 30% T/T deposit plus 70% against copy of B/L as standard; Alibaba Trade Assurance or L/C available for new buyers; an English-speaking export team that answers enquiries within one working day. Slow replies during the sales phase almost always predict slow replies during the complaint phase.

Conclusion

Most B2B importers do not actually need ten proveedors — they need one primary proveedor who can prove food-safety compliance, hold their thickness spec over multiple containers, and ship reliably from a well-connected port, plus one backup. Browse our full film adherente products to see what a leading film adherente fabricante offers across PVC, PE and jumbo-roll formats. The list above is a map of where those candidates sit.

SUNWRAP has produced grado alimenticio PVC film adherente for 20+ years under Korean investment and was named one of China’s top-ten cling-film brands. If you are sourcing PVC film adherente for Southeast Asia, the Middle East, Egypt or Africa, contact our export team — or browse our PVC film adherente and film adherente jumbo roll product pages for specs, roll sizes and documentation. The follow-up articles most importers read next are our [7-step proveedor checklist](/blog/how-to-choose-grado alimenticio-pvc-cling-film-proveedor/) and the film adherente price guide 2026.

Frequently asked questions

How many PVC film adherente fabricantes are there in China? Several thousand registered plastic-film producers exist, but the realistic B2B pool for grado alimenticio PVC film adherente is 40–60 factories with consistent compliance and export experience. Alibaba and 1688 combined show roughly 4,000 cling-film listings, many of which are traders or rewinders rather than true fabricantes.

Are Chinese PVC film adherente fabricantes food-safe? The branded factories in Tier 2 typically are. Any credible proveedor should send FDA 21 CFR 177.1950 and SGS migration reports on request. If they cannot, treat that as a red flag.

Should I buy from a brand fábrica or a smaller OEM fábrica? For supermarket private label, HORECA and food-processor end-use, buy from a branded fábrica. Price premium is usually 5–10%, and in exchange you get consistent thickness, stable formulation, and full export paperwork.

What is the typical MOQ? One 20GP container for jumbo rolls, 500–1,000 cartons for finished consumer packs. Trial orders are often negotiable for first-time buyers under Trade Assurance.

Where in China are film adherente factories concentrated? Zhejiang (Ningbo, Cixi, Hangzhou), Jiangsu (Suzhou, Wuxi), Guangdong (Foshan, Dongguan), with smaller clusters in Shandong and Hebei. The east-coast clusters dominate grado alimenticio export because they sit next to Ningbo-Zhoushan and Shanghai ports.

---

Looking for a reliable film adherente proveedor? SUNWRAP is a Korean-invested fabricante in Ningbo, China — FDA-compliant, SGS-tested, 20+ years of production. Request a quote →